30th April 2017 |

PT2005 Composite PowerTower®

150mm (6") Composite PowerTower® for all other 2kW / 4kW radomes

PT2005 Composite PowerTower®PT2005 Composite PowerTower®

Description

PRODUCT INFO

For Radomes, Open Array and Small Satcom/TV Antenna

Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance.

Scanstrut’s Composite PowerTower offers a single “monocoque” structure for outstanding strength and surface finish. Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.

Features:

Watertight Installation

Pre-fitted IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.

Ease of Install

Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using own mounting bolts.

Choice of Heights

150mm (6”) or 350mm (14”) heights available.

Aesthetic Single Piece Moulding

Curves and strength to suit any boat with a 30° aft leaning profile to compliment any powerboat.

Choice of 2 other materials:

• Aluminium PowerTower – Bespoke extrusion = strength, good looks and choice
• Stainless PowerTower – Marine grade stainless - traditional look, mirror finish

TECHNICAL SPECIFICATIONS

PRODUCT DOWNLOADS

Technical Information

download

How to Install your Scanstrut

download

Scanstrut Brochure

download

ACCESSORIES

SC110 Nav Light Mount

SC110 Nav Light Mount

Product Details




SC111 GPS / VHF / Navtex Antenna Mount

SC111 GPS / VHF / Navtex Antenna Mount

Product Details




SC112 GPS / VHF / Navtex Antenna Mount

SC112

Product Details




SC113 Integrated Nav Light Mount

SC113

Product Details




PT3010 4° Base Wedge for PowerTower®

PT3010 4° Base Wedge for PowerTower®

Product Details




SPT2010 4° Base Wedge for PowerTower®

SPT2010 4° Base Wedge for PowerTower®

Product Details




GPS / VHF Antenna Mount

Please note the following when ordering:

SC111 – Mounted starboard of radar centreline

SC112 – Mounted port of radar centreline

4° Base Wedge for PowerTower®

Find your compatible 4° Base Wedge below:

PT3010 – For installation with Composite & Aluminium PowerTower

SPT2010 – For installation with Stainless PowerTower

FAQs

Do I need to use the foam inserts supplied or can I use a sealant?

You can use either – a sealant such as Sikaflex can be used in place of the foam seal we provide with the product.

Are the PowerTower forward or aft leaning?

It depends which PowerTower you order. Composite and Stainless PowerTowers all have a 30° aft leaning profile.

Aluminium PowerTower are either 25° forward leaning or if you are installing an open array antenna, they are 25° aft leaning.

What is the difference between the PowerTower material options?

All of our PowerTower models are made from marine grade materials. The choice of which you install can come down to personal preference. As a guide though, the Stainless or Aluminium models are better suited to RIBS, Composite is a good weight saving option.

Our Gantry Mount accessory can also only be installed on the Stainless or Aluminium models so that might also be a factor in which product you choose.

GENERAL FAQs

I have some old electronics, how can I work out if they will fit your products?

If your electronics are not listed in our part number table, please contact Scanstrut as we may be able to assist with compatibility.

Where can I order this product?

Scanstrut products are available worldwide via our network of distributors.

Visit our 'Dealer Locator' page to find your local dealer.

Can I see this product installed / on display anywhere?

Scanstrut products are displayed at various boat shows throughout the season. Click on 'News & Shows' to view the upcoming boat shows.

Alternatively, find your local dealer on our where to buy page and see if they have a store to visit.

I am upgrading my marine electronics, will I be able to use the same Scanstrut mount?

It all depends on the electronics you are using - please contact Scanstrut for further assistance.

What part no. do I require?

To find your part number, use our 'Part Finder'.

How much does the product cost?

Pricing for Scanstrut products is available from our network of distributors.

Contact them directly for your local pricing.

I am from the press and I would like more information / pictures on your product.

Good news! Contact our marketing team and they will be happy to help.

Click on 'Contact' in the menu to send your message.

REVIEWS

Download our Brochure
Sign up to our newsletter
 
© 2017 Scanstrut Ltd | Terms and Conditions | Cookies